Main content:
A battery swap station is a device that can provide quick battery swapping services for electric vehicles and electric two-wheelers.
We can take out the battery and put it in the battery swap station, and then take out the new battery for replacement, so as to achieve the purpose of driving longer and longer distances. So how to use battery swap station correctly?
1. Precautions on how to use battery swap station correctly
① Battery swapping stations
- Before use, you should check the battery type and quantity of the battery swap station to avoid choosing the wrong type of battery.
- When operating, you should pay attention to your own safety, ensure that the electric vehicle is parked on a stable ground and cut off the power supply.
- Do not pull out the battery at will during operation, and avoid excessively shaking the battery exchange station.
- Keep the battery clean and dry to avoid short circuits in the electric drive system, which could prevent the vehicle from starting.
- Do not store other items in the battery swap station.
- Tools are required when replacing the battery, and safety needs to be taken into account. If there is an operational problem, please contact the relevant staff for handling.
② Electric two wheelers
- Take out the battery in the vehicle, and take care to disconnect the battery connection cable and mounting bracket.
- Remove the battery case with screws and remove the old battery. Install the new battery into the battery housing and tighten the screws.
- Connect the positive and negative poles of the battery correctly to avoid damage caused by incorrect connections.
- Connect the battery to the connecting cable and install the bracket.
- Recalibrate the vehicle after replacing the battery to ensure the accuracy of the battery level.
Knowing how to use battery swap station correctly can help replace the battery more easily and quickly, and it can save time on charging. However, it is necessary to carefully follow the above usage steps and precautions when using them to ensure that the battery swapping process is completed smoothly and at the same time avoid unnecessary problems.
2. Analyse the process of how to use battery swap station correctly
- Find the target battery swap station
Before using the battery swap station, you need to find the target one. In general, you can find all the battery swapping stations near me and their locations in the mobile app. We can choose the closest and most convenient battery swap station for ourselves according to our needs.
- Scan the QR code
After finding the target battery swap station, you should open the APP on your mobile phone and authenticate by scanning the QR code on the battery swap station. The QR code can be displayed on the screen on the swap station or on landmarks near it.
After scanning the QR code, the mobile app system will automatically identify the user's information, such as the charging number, charging amount, etc. If you haven't logged in before, you may need to complete your information first.
- Open the door of the slot
When the certification is passed, you need to press the switch to open. When opening the door, pay attention to the surrounding environment to avoid hitting the door or scratching.
- Plug and unplug the battery
After opening the station door, you can follow the prompts to remove the used battery and put the new battery into the battery compartment. When plugging and unplugging the battery, pay attention to the battery plugging and pulling gently, and do not use excessive force to avoid collision or damage.
- Close the door of the slot
After installing the battery, the door of the battery swap station needs to be closed to ensure safety and protection of the battery. When closing the door, check that the battery is properly installed and that the door is fully closed. After confirming that it is correct, you can press the off switch on the station door to close the door of the battery swap station.
The battery swap station is a device that provides battery swapping services for electric vehicles, mainly supporting electric vehicles charged with 12v 100ah lithium ion batteries.
Ordinary users are less likely to use it due to higher charges, but with the development of technology, the charges of battery swapstations are expected to be reduced, so that more users can enjoy convenient battery swap services. And it is also important to know how to use battery swap station correctly, and we can also choose different packages and battery swap modes.
3. How can I tell if the battery swapping station is compatible with my battery
First of all, we should make it clear that the battery of the battery swap station is mainly lithium battery. This is because lithium batteries have a high energy density and long service life, making them ideal as a power source for electric vehicles.
Therefore, as long as your electric vehicle uses a 12 volt 200ah lithium battery and the charging port on the car is adaptable, then your electric vehicle is likely to be suitable for battery swap stations.
Of course, there are also some specially customized electric vehicles and battery situations that may not be suitable for battery swap stations. This mainly depends on whether the battery specifications and charging interface of the electric vehicle match the standard of the station.
If you are not sure whether your electric vehicle supports battery swap stations, you can consult the service provider or check the manual of electric vehicles for more accurate information. The compatibility of the battery swap station mainly depends on the battery specifications and charging interface of the electric vehicle.
As long as your electric vehicle uses a lithium battery, and the charging port meets the standards of the battery swap station, then your electric vehicle may be suitable. Of course, for the case of specially customized electric vehicles and batteries, further consultation and confirmation may be required.
4. Can the same battery swapping station be adapted to different of batteries
TYCORUN battery swap station is compatible with 48 volt, 60 volt and 72 volt batteries, intelligent identification and charging to ensure battery swap station safe, support separate charging, real-time viewing function to meet user needs, and has been widely praised. This gives users more choices.
- Compatible with multiple specification battery
TYCORUN battery swap station has strong compatibility, the same station can be compatible with 48 volt, 60 volt, 72 volt full specification battery. This means that no matter which battery size you want to put in it, it will be compatible in the same station.
At the same time, it also has an intelligent recognition function. When the user puts the battery into the station, the system will automatically recognize the battery specification and automatically charge it according to the specification.
This feature not only greatly improves the efficiency of battery replacement, but also ensures how to use battery swap station correctly, so you no longer have to worry about damaging the battery due to improper charging.
- Intelligent recognition
In addition, our battery swap station also supports the function of separate charging. The flexible battery swapping stations business model not only meets the needs of different users, but also saves you unnecessary expenses. It is also important to know the number of swappable batteries in the nearby swapping station. To this purpose, we also provide a real-time viewing feature.
5. Conclusion
The process of using the battery swap station is not complicated, as long as you master each step, you can complete the battery swapping operation quickly and safely. How to use battery swap station correctly?
It is necessary to pay attention to the matching of battery specifications and voltages, as well as the positive and negative poles connected to the battery to avoid damage to the electric vehicle. The emergence of electric two-wheeled vehicle battery swap stations has greatly facilitated our experience.
Related articles: best battery swap station system, top 10 battery swap station companies, battery swap vs charging