The best motorcycle tires guarantee a safe ride

Motorcycle tires, as a key component of the motorcycle in direct contact with the ground, are self-evident in their importance, which is an important part of riding and is essential for riding experience and safety.

As motorcycle culture grows more prevalent, so does the importance of choosing the best motorcycle tires. Today's article is about the best motorcycle tires.

1. Characteristics of motorcycle tires

• Maximum value

Each tire will have its own maximum air pressure value KPa, maximum load capacity kg, and the limit speed km/h, which is the red line that the tire cannot touch, otherwise there will be a possibility of a puncture.

• Level

There are usually 4 levels, 6 levels, and 8 levels, the higher the level, the better the material of the tire, and the rear tire can not use four layers, so you must pay attention when choosing.

• Direction

Each tire will have its own normal rotation direction, which is also the case with ordinary tubeless tires. If we do not pay attention to the direction of assembly, then its grip will be reduced.

And it will also affect the actual drainage effect. Therefore, it is necessary to follow the direction of the arrow or pattern on the side of the tire to carry out the correct installation.

• Tire tapping

Motorcycle tires will have a yellow dot on the sidewall, which is the lightest position for the entire tire. This position must be aligned with the hub valve, because the hub valve is the thickest part of the entire hub.

And it is also the heaviest position. When these two points coincide completely, the error of the whole wheel will be smaller when it is dynamically balanced.

• Operating temperature

Tires also have their own operating temperature, which can be neither too low nor too high. If it is low, there will be a lack of grip, and if it is high, there will be a possibility of puncture.There are many reasons that will increase the temperature of motorcycle including charging temperature and battery temperature.

Therefore, the tire grinding of some riders is not playing cool, but using a relatively extreme way to make the tire quickly reach the correct working temperature in order to exert its normal performance.

2. Introduce the common types of motorcycle tires

The best motorcycle tires can be roughly divided into the following categories according to the usage scenarios and characteristics:

• Compositional structure

From the form of composition, it can be divided into two categories: inner tube and vacuum tube, among which motorcycle tires with inner tubes have been slowly marginalized, and vacuum tires have become mainstream.

• Material function

In terms of materials, best motorcycle tires can be divided into three categories: ordinary tires, semi-hot melt, and full hot melt, and their main difference is that the functional properties of grip and durability are different.

Pattern classification If we can't tell the difference between the material of the tire and the actual effect, then the pattern will be a very visual representation of different tires.

At present, there are many tire patterns, although their names will be different, and the layout of the patterns will be different, but in the final analysis, they are all to meet the grip needs of different scenarios.

• Specific models

According to the general standards of motorcycle tires at this stage, there will be three sets of numbers for the basic model, such as 140/70-17, of which the first 140 is the tread width, 70 is the flat ratio. We can simply understand it as the height of the inflated rear shoulder, 17 is the tire diameter, and it matches the wheel size.

3. The material for best motorcycle tires

In addition to the type, tire material is also an important factor to consider when choosing. It is mainly divided into the following categories:

Ordinary rubber tires: cost-effective, suitable for daily transportation.

Semi-hot melt tires: on the basis of ordinary rubber, a special rubber formula is added, so that the tire can provide better grip after reaching a certain temperature. It is suitable for riding scenarios with higher grip requirements.

All-melt tires: designed for track and high-speed driving, when the tire reaches a certain temperature, its surface becomes more sticky, providing superior grip. However, the price is relatively high and the wear and tear rate is relatively fast.

4. How to choose the best motorcycle tires

When it comes to choosing the best motorcycle tires, here are a few factors to consider:

• Specification

When choosing a tire, you must not make a mistake about its specifications. If the specifications are not correct, either it cannot be installed, or it is too loose to be used. This has resulted in unnecessary economic losses. 

• Width

If you can afford it, try buying larger tires. Because the wide tires have a large contact surface with the ground, the grip is good, so that the driving force and braking force can be transmitted well. The engine performance is well performed, improving the smoothness, comfort and safety of driving.

• Tread

Tread is still an important indicator of tire performance. The shape of the tread determines its drainage and ability to drain other debris, which also affects its grip.

If you often drive on mountainous terrain or dirt roads, snow, ice roads, etc., you should choose off-road tires with wide groove and deep groove patterns. If you often drive on the road, you should choose a tighter tire groove, such as ring, arrow, etc.

• Adaptability to road conditions

Different road conditions require different types of tires. For example, on slippery or muddy roads, all-terrain tires may be more suitable. On dry, smooth roads, you can opt for road tires that are more suitable for everyday riding.

• Brand and value

All brands have their own product features and benefits. When choosing, you can choose the right brand and model according to your budget and needs.

When choosing the best motorcycle tires, motorcyclists should make the most appropriate choice according to their riding needs, budget and model. Different types of tires are suitable for different riding scenarios and road conditions, while tires from well-known brands can provide more reliable performance and quality assurance. This function is the same as 12v 100ah lithium ion batteries and 12 volt 200ah lithium battery.

5. How to maintain the best motorcycle tires

Mastering some common sense of care and maintenance can not only save money, but also reduce many of the troubles caused by tire problems when leaving the car. It is recommended that riders develop good driving habits, which can not only save tires, but also extend the life of the engine(motor inverter). As:

• Start and brake gently.
• When going uphill, be diligent in shifting gears and avoid starting halfway.
• Don't go too hard when crossing potholes.
• When parking, you should develop the habit of propping up the frame.

In addition, tire maintenance should be carried out with appropriate air pressure, and tires should be inflated in strict accordance with the air pressure marked on the tires. Because the amount of air pressure is directly related to the service life and performance of the tire.

6. Conclusion

Related articles: motorcycle battery near me, how to make your battery last longer, flat battery vs dead battery