Main content:
With the rise of electric two-wheelers, battery swapping stations have emerged as a convenient solution for riders who don’t want to wait for long charging times. One of the most frequently asked questions among new electric vehicle users is: how long does it take to swap a battery? On average, a battery swap at a TYCORUN station takes around 60 seconds, while first-time users might need more longer, depending on familiarity with the process. In this comprehensive guide, we’ll explore the entire process of battery swapping at TYCORUN stations, discuss compatibility, safety precautions, and explain how you can make the most out of these modern stations.
Understanding Battery Swapping Technology
Battery swapping stations are specially designed locations where electric vehicle users can exchange a depleted battery for a fully charged one. Unlike traditional charging, which can take several hours, swapping a battery is often completed within minutes.
TYCORUN, a leading brand in electric mobility, has established an extensive network of swapping stations to enhance the convenience of electric two-wheeler ownership. These stations are equipped with multiple fully charged batteries, automated systems, and user-friendly interfaces.
The core advantage is speed. For busy commuters and delivery riders, knowing how long does it take to swap a battery can be a deciding factor when choosing an electric vehicle over a conventional fuel-powered one.
How Battery Swapping Works and How Long Does It Take To Swap a Battery?
1. Find the Target Battery Swap Station
Before using a battery swap station, you first need to locate the right one. Through the TYCORUN mobile app, users can easily view all nearby battery swapping stations along with their real-time locations and available slots. Simply choose the closest and most convenient battery swap station according to your current route and schedule.
2. Open The App in Your Smartphone for Authentication
After reaching the target station, open the TYCORUN app on your smartphone and scan the QR code displayed on the swap station’s screen or nearby signage. This process ensures secure user verification and automatically retrieves your account details, such as battery ID, balance, and membership information.
If you haven’t logged in before, the app will prompt you to complete a short registration to link your vehicle and account. Once verified, you can proceed directly to the swapping process.
3. Start the Battery Swapping Process
One of the biggest advantages of the TYCORUN as the best battery swap station system is its ultra-fast swapping speed. Unlike traditional systems that take several minutes, TYCORUN enables riders to get a fully charged battery in just 60 seconds — making it one of the fastest battery swap systems in the industry.
This speed allows electric two-wheeler users, especially delivery riders or commuters, to stay on the move without unnecessary waiting time.
4. Open the Battery Compartment Door
After authentication, press the unlock button on the swap station to open the designated battery compartment. Always be mindful of your surroundings when opening the door to prevent it from hitting nearby vehicles or objects.
5. Remove and Insert the Battery
Follow the on-screen prompts to remove the depleted battery and insert the new, fully charged one into the correct slot. Handle the batteries carefully — plug and unplug gently without applying excessive force. This prevents damage to the connectors and ensures a smooth connection.
6. Close the Compartment Door
Once the new battery is installed, close the compartment door firmly to secure it in place. Double-check that the battery is properly seated and the door is completely locked. Then, press the power-off switch or confirmation button on the station screen to finish the swap safely.
7. Complete the Swap and Continue Riding
After you close the compartment, the system automatically updates your account and confirms the successful transaction in the TYCORUN app. You can now continue your journey with a 100% charged battery — all completed within about 60 seconds.
Read: How does battery swapping work
How To Use Battery Swap Station Correctly?
Battery swapping stations
To ensure safe and efficient operation when using a TYCORUN battery swap station, follow these important precautions:
- Check the battery type and quantity
Before using the station, always verify the battery type and the number of available batteries to avoid selecting the wrong model.
- Ensure your safety before operation
Park your electric two-wheeler on stable, level ground and make sure the power supply is cut off before starting the swapping process.
- Do not remove the battery randomly
Avoid pulling out the battery at will or shaking the swapping cabinet excessively during operation to prevent system errors or damage.
- Keep the battery clean and dry
Maintain the battery’s cleanliness and dryness to avoid short circuits in the electric drive system, which could stop your vehicle from starting.
- Avoid storing other items inside the station
The battery swap station is designed solely for battery exchange; do not store unrelated objects inside the compartments.
- Use the proper tools for replacement
When replacing the battery, make sure to use the required tools and always prioritize personal safety.
- Contact staff if an issue occurs
If you encounter any operational problems during the battery swapping process, contact the relevant TYCORUN staff for immediate assistance.
Electric Motorcycle
- Remove the battery safely
Start by taking the used battery out of your vehicle. Be sure to unplug the connection cables and carefully detach any mounting brackets that secure the battery in place.
- Replace with a new battery
Open the battery housing, then take out the old battery pack. Insert the fully charged replacement battery into the same position and tighten the screws firmly.
- Check the polarity connection
Make sure the positive and negative terminals are connected to the correct points. Reversing the polarity may cause short circuits or damage to the system.
- Reconnect and secure the setup
Attach the connection cable to the new battery and reinstall the bracket properly so everything stays fixed and stable during operation.
- Recalibrate the system
Once the new battery is installed, recalibrate the vehicle’s system to ensure the power level reading and battery data are displayed accurately.
- Follow the correct swapping procedure
For a smooth and safe experience, always follow each step and safety instruction carefully.
Tips for Efficient Battery Swapping
To make your swapping experience faster and safer:
- Pre-check battery level: Swap before your battery is fully depleted.
- Use the app: Reserve a battery in advance if your station supports it.
- Familiarize yourself: Practice swapping at low-traffic hours to get used to the process.
- Follow maintenance: Keep your battery clean and well-maintained to avoid delays.
These simple strategies help reduce the overall time and directly influence how long does it take to swap a battery.
Battery Swapping for Different Use Cases
- For Daily Commuters
For urban commuters, swapping a battery at TYCORUN stations can save valuable time, allowing them to avoid long charging sessions at home or work. Typical swaps take 1-2 minutes.
- For Delivery Riders
Delivery and courier services benefit the most from battery swapping. Multiple swaps in a day ensure uninterrupted service. Knowing how long does it take to swap a battery helps drivers schedule deliveries efficiently.
- For Fleet Management
Companies managing multiple electric vehicles can use swapping stations to maintain peak efficiency and prevent downtime, ensuring smooth operations for all vehicles.
Final Thoughts
Battery swapping technology is revolutionizing the electric two-wheeler experience. With TYCORUN swapping stations, riders can enjoy a fast, safe, and convenient way to keep their vehicles running without long charging delays. By following the outlined precautions, checking compatibility, and using the TYCORUN app, you can ensure a seamless experience.
Knowing how long does it take to swap a battery empowers riders to plan trips, optimize delivery schedules, and enjoy the benefits of electric mobility to the fullest.
Battery swapping stations are not just a convenience—they are an essential component of the future of sustainable urban transportation. With proper use, they make daily commuting faster, more efficient, and eco-friendly.
FAQs
Can I swap a partially charged battery?
Yes, the station accepts any battery with low charge, though it’s ideal to swap before it’s fully drained.
Is battery swapping safe?
Yes. Automated battery swapping stations follow strict safety protocols and advanced diagnostics to prevent short circuits, overheating, or faulty installations.
What happens to the old battery after swapping?
Once you swap your used battery, the station automatically collects and recharges it for future use. TYCORUN ensures every battery is maintained under strict safety and performance checks before being redistributed, so you always receive a fully charged and healthy battery during your next swap.
Who We Are
At TYCORUN, we specialize in lithium battery manufacturing and offer one-stop battery solutions. Since 2007, we’ve been committed to R&D, production, and sales of lithium battery packs, battery cells, and battery management systems (BMS). Our products cover a wide range of applications such as electric motorcycles, energy storage, and custom solutions. With over 15 years of experience and a strong global network, TYCORUN supports OEM/ODM services, provides technical support, and ensures quality with multiple certifications, including UN38.3, MSDS, CE, and UL. Contact Us to find your battery need.
Related Articles: Battery swap station site selection, Battery swapping station cost, Battery swapping stations business model
